10 Best 3d Printers Under 500
#1
Creality Hi 3D Printer, Multi Color 3D Printer (Needs CFS), 500mm/s High Speed Auto-Leveling Automatic Filament Reading Clog-Free Extruder
Brand: Creality
$509.15
⭐ 4.1
Read more
- Multi-color 3D Printing need CFSSupports 16-color precise color mixing (requires 4 sets of CFS modules), which can greatly meet the color needs of professional designers
- Dual-mode silent architectureWork mode (55dB) and silent mode (48dB) free switching, with fluid power fan + high-precision linear guide
- Intelligent Material Recognition SystemCreality Hi has an RFID reader that, after scanning, automatically recognizes the color and filament type in use (for Creality RFID filaments only).
- Pre-assembledCreality Hi, 95% pre-installed completion, 7-inch folding touch screen with integrated real-time monitoring, high pixel camera supports time-lapse photography
- Pre-assembledCreality Hi, 95% pre-installed completion, 7-inch folding touch screen with integrated real-time monitoring, high pixel camera supports time-lapse photography
Check Price
#2
Creality Ender 3 V3 SE 3D Printer, 250mm/s Printing Speed FDM 3D Printers with CR Touch Auto Leveling, Sprite Direct Extruder Auto-Load Filament Dual Z-axis Y-axis, Printing Size 220 * 220 * 250mm
Brand: Comgrow
$360.00
⭐ 4.7
Read more
- FASTER AND LIVELY PRINTING EXPERIENCE: Ender 3 V3 SE 3d printer can print at up to speed 250 millimeter per second with acceleration 2500 millimeters per square second, faster than most of printers on the market. You can complete models efficiently, saving time to wait for print jobs. Moreover, it can keep good printing quality at the same time. The optimized UI uses motion graphics to display the leveling process and other parameters, so you will know how the printer is doing at a glance, providing you a perfect printing experience
- EASILY START TO PRINT: Creality Ender 3 V3 SE 3D printer is easy to put together in 3 steps within about 20 minutes only. It equips CR Touch for auto leveling and strain sensor for auto Z offset. It is easy to get a perfect first layer. Leveling is the important process before printing, it usually make customers in trouble. This printer can save your time in leveling, and easily start to print. Which is friendly to all of customers including the beginners
- CAPABLE "SPRITE" DIRECT EXTRUDER: The "Sprite" Direct Extruder of Ender 3 V3 SE enables smooth feeding of various filaments, including PLA, PETG, and TPU. And the extruder is market-proven for its reliability, as over 500,000 units have been shipped worldwide
- DUAL STABLE STRUCTURE: Creality Ender 3 V3 SE, Dual Z-axis synced by a quality timing belt, ensuring high print quality. The rigid dual Z-axis lead screws reduce Z wobbling effectively. The Y-axis features two 8 millimeter linear shafts made of strong and wear-proof steel, which underpins a steady and accurate motion of the build platform for a lasting time
- 32-BIT SILENT MAINBOARD AND MORE: This printer equips a 32-bit silent mainboard with an advanced stepper motor drive to control all axes more precisely for less operation noise. The PC spring steel build plate is sticky and flexible, making it easy to remove the printed models by bending it slightly. Moreover, Ender 3 V3 SE equips the auto filament loading and uploading, one tap to load the filament, and one tap to unload it
Check Price
#3
3D Printer for Beginner, 40mm/s FDM 3D Printers, 4x4x4in Printing Size, Frequency Division Multiplexing 3D Printing Machine for Home Office School (AU Plug)
Brand: Plyisty
$164.47
⭐ 4.1
Read more
- Excellent Print Quality: The beginner 3D printer features a compact printing size of 4 x 4 x 4in (100 x 100 x 100mm) and is equipped with an excellent all metal nozzle. This design ensures optimal printing temperatures, significantly reducing the risk of printing errors. Supporting 1.75mm PLA and TPU filaments, it delivers high layer resolutions of up to 0.05mm, ensuring that each model is printed accurately with slick, vibrant results, suitable for educational and innovative projects.
- Rugged Construction: Made from robust ABS material, this fully assembled 3D printer is built to withstand regular use while maintaining its performance. Its sturdy design ensures reliability and longevity, making it a valuable addition to home workshops, classrooms, or makerspaces.
- User Friendly Setup And Operating: Designed with beginners in mind, this frequency division multiplexing 3D printer allows for easy usage even if you have no experience with 3D slicing software. Simply download the model files (Gcode files) onto a memory card, insert it into the printer, and you're ready to start printing. With straightforward controls, you can load materials by pressing the + key and easily unload them with the - key. This intuitive operating ensures you can focusing on
- Rapid Heating And Printing: The frequency division multiplexing 3D printer is engineered for efficient heating, making it suitable for beginners. With a unique key system, you can effortlessly start, stop, and control the printing process. The nozzle heats evenly and reaches temperatures of 180C in just 5 minutes, which is sufficient for PLA material. This fast heating capability minimizes downtime, allowing you to begin your projects quickly and efficiently.
- Versatile Printing Options: You can print from both included model files and models downloaded online, offering versatility in your innovative projects. This feature enables you to explore a wide range of designs, fostering innovation and experimentation. The 3D printing machine serves as an excellent educational tool, encouraging kids to develop their spatial imagination and 3D perception through hands on learning experiences.
Check Price
#4
ELEGOO FDM 3D Printer Neptune 4 Max with Up to 500mm/s Printing Speed, 300℃ High-Temp Nozzle, Dual-Gear Direct Extruder, 420x420x480mm³/16.53x16.53x18.89 Inch Printing Size
Brand: ELEGOO
$799.00
⭐ 4.4
Read more
- Pre-installed Klipper Firmware: The Neptune 4 Max comes with the powerful Klipper firmware, enabling impressive printing speeds of up to 500mm/s (default 250mm/s) and up to 8000mm/s accelerations, supporting advanced features such as input shaping and pressure advancing. Equipped with acceleration sensors on the X and Y axes for automatic calibration and improved print quality.
- Massive Build Volume: With a spacious build volume of 420x420x480mm, our printer allows you to bring your ambitious designs to life, whether for large models or multiple smaller objects, this generous build volume provides ample space for your creations.
- Dual-Gear Direct Extruder: Our printer boasts a dual-gear direct extruder with a 5.2:1 reduction ratio for reliable filament feeding and optimal extrusion. The full titanium alloy throat pipe enhances heat dissipation, reducing filament clogs and maintaining consistent printing performance.
- 300C High-Temp Nozzle Kit: Our printer features a high-temp nozzle kit capable of reaching up to 300C. The extended hot end design, along with the 60W ceramic heating element and brass heating block ensure fast and uniform filament melting and extrusion. Automatic calibration of nozzle PID parameters further improves temperature control stability.
- Auto Bed Leveling + Auxiliary Leveling: Enjoy untroubled bed leveling with the 121 (11x11) points auto bed leveling system! Additionally, auxiliary leveling by hand-twist knobs allows further fine-tuning, ensuring that your first-layer printing comes out great every time.
- Effective Cooling Performance: The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for comprehensive and efficient heat dissipation. Two additional 6025 ball-bearing blower fans behind the print head quickly cool down the newly deposited hot filaments, preventing warping or deformation for better overhang and bridge results.
Check Price
#5
ELEGOO FDM 3D Printer Neptune 4 Plus with Up to 500mm/s Printing Speed, 300℃ High-Temp Nozzle, Dual-Gear Direct Extruder, 320x320x385mm³/12.59x12.59x15.15 Inch Printing Size
Brand: ELEGOO
$649.00
⭐ 4.4
Read more
- Pre-installed Klipper Firmware: Neptune 4 Plus comes with pre-installed Klipper firmware and supports input shaping and pressure advance. This enables an impressive printing speed of up to 500mm/s (default 250mm/s) while maintaining print quality. Both X-axis and Y-axis have acceleration sensors for automatic calibration of resonance compensation to minimize vibrations and improve print precision.
- Large Build Volume: Unleash your creativity with a generous build volume of 320x320x385mm/12.59x12.59x15.15 inch. This sizable printing area allows you to create larger models or multiple smaller objects in a single print, expanding your creative possibilities.
- Dual-Gear Direct Extruder: The printer adopts a dual-gear direct extruder with a 5.2:1 reduction ratio, ensuring smooth and precise filament feeding. The full titanium alloy throat pipe facilitates fast heat dissipation, reducing nozzle clogs for consistent and reliable printing.
- 300C High-Temp Nozzle: The 300C high-temp nozzle kit features an extended hot end, a 60W ceramic heating element and a brass heating block, capable of printing various filaments including nylon. The automatic calibration of nozzle PID parameters ensures precise temperature control for stable and consistent printing performance.
- Auto Bed Leveling + Auxiliary Leveling: Achieve excellent first-layer adhesion and print quality with the 121 (11x11) points auto bed leveling system. Additionally, fine-tune the bed's leveling manually with the hand-twist knobs for optimal alignment and printing conditions.
- Efficient Cooling System: The print head incorporates 2x4015 thickened double-sided cooling fans and a 3010 ball-bearing blower fan for omnidirectional heat dissipation and preventing filament warping or deformation. The 2x6025 ball-bearing blower fans behind the print head further enhance cooling performance by rapidly cooling the newly deposited layers.
Check Price
#6
ELEGOO FDM 3D Printer Neptune 4 Pro with Up to 500mm/s Printing Speed, Auto Bed Leveling, Dual-Gear Direct Extruder, 300℃ High-Temp Nozzle, Intelligent Segmented Heatbed, 225x225x265mm³ Printing Size
Brand: ELEGOO
$549.00
⭐ 4.1
Read more
- Pre-installed Klipper Firmware: The Neptune 4 Pro 3D printer is designed to be fast and efficient. It features a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor for sufficient processing power, allowing it to print at a amazing speed of up to 500mm/s (recommended 250mm/s), and supports advanced functions like input shaping and pressure advance to achieve accurate and smooth models. The 8GB RAM can store many models and quick access when needed.
- Dual-Gear Direct Drive Extruder: The dual-gear direct drive extruder with a 5.2:1 reduction ratio for smooth and consistent extrusion, combined with the copper-titanium bi-metal throat pipe and unique air duct design, improve heat dissipation and reduce nozzle clogging.
- 300C High-temp Nozzle: With a high-temperature nozzle reaching 300C, the printer can handle a wide range of filaments, including PLA, PETG, ABS, TPU, and high-temperature filaments like nylon. The extended hot end design ensures consistent heating and faster melting and extrusion, resulting in faster printing speed.
- Intelligent Segmented Heatbed: With 100W+150W power output, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally, the surface of the PEI magnetic platform is marked for guidance.
- Auto Bed Leveling + Auxiliary Leveling: With 121 (11x11) points auto bed leveling, you can achieve consistent and reliable prints every time without the need for manual bed leveling. Additionally, the auxiliary leveling by hand-twist knobs allows for further fine-tuning of the print bed's level for improved print quality.
- Efficient Heat Dissipation: ELEGOO Neptune 4 Pro also features 2 thickened double-sided 4015 ball bearing cooling fans and 4x4020 ball bearing blower fans behind the print head for omnidirectional rapid cooling the newly printed layers to prevent warping and improve overall print quality even at a fast printing speed.
Check Price
#7
Bambu Lab A1 Mini 3D Printer, Support Multi-Color 3D Printing, Set Up in 20 Mins, High Speed & Precision, Full-Auto Calibration & Active Flow Rate Compensation, ≤48 dB Quiet FDM 3D Printers
Brand: BAMBULAB
$459.00
⭐ 4.1
Read more
- High-Speed Precision: Experience unparalleled speed and precision with the Bambu Lab A1 Mini 3D Printer. With an impressive acceleration of 10,000 mm/s, the A1 Mini delivers blazing-fast printing while maintaining exceptional accuracy and detail in your prints.
- Full-Auto Calibration: Say goodbye to manual calibration hassles. The A1 Mini 3D printer takes care of all the calibration processes automatically, ensuring optimal performance for every print. Enjoy a seamless printing experience with precise Z-offset, bed-leveling, and more.
- Active Flow Rate Compensation: Achieve consistently smooth prints with active flow rate compensation. The algorithm actively compensates the flow rate according to the readings to extrude with accuracy, ensuring flawless prints.
- Multi-Color Printing with AMS lite: Unlock your creativity with vibrant and multi-colored 3D prints. The Bambu Lab A1 Mini 3D printers make multi-color printing accessible and reliable for everyone, bringing your designs to life in stunning detail. Note: AMS lite required, get A1 Mini Combo or buy AMS lite seperately.
- Easy and Quiet 3D Printing: A1 mini 3D printer offers easy printing with a user-friendly interface and simplified touchscreen. Setup for your first print takes just 20 minutes thanks to its pre-assembled design. The 1-Clip quick swap nozzle allows for convenient maintenance and versatile printing options. Plus, enjoy a quiet printing environment with active motor noise cancellation, ensuring 48 dB noise levels.
Check Price
#8
FLASHFORGE Adventurer 5M 3D Printer, 600mm/s Max High-Speed 3D Printers with Auto Leveling, Core XY Structure, Vibration Compensation and Out-of-The-Box, Large Printing Size 220 * 220 * 220mm
Brand: FLASHFORGE
$399.00
⭐ 4.4
Read more
- Succeed with a Perfect First LayerFull-auto one-click leveling calibrates and levels the bed properly, making you a perfect first layer for every 3D print. It provides accurate and smooth surface to achieve quality printing performance.
- Ultra-Fast and Exceptional QualityCore XY up to 20000 mm/s Acceleration, Maximum speed 600mm/s, the acceleration from zero to 600 mm/s takes just 0.025 seconds. From unboxing to starting printing, Only 10mins, Enjoy happy printing every day and great all-around quality.
- Vibration Compensation&Less Waiting TimeVibration compensation, eliminating ghosting in prints. Nozzle with a flow of 32mm/s, 50w heating power, 200 heating up in 35 seconds. Precise and consistent extrusion for smooth and no-blur prints.
- Filament Run-out Sensor & Power Loss RecoveryEliminate the problem of empty spools during printing. Change filament when empty and Resume. Worry-free from a power cut-off, you can resume the print from where it left off.
- Robust designs for superior qualityOpen 3D printer, Suitable for use in open and, well-ventilated environments, Flexible removable PEI steel plate support PLA/PETG/TPU (0.4mm nozzle) and PLA-CF/PETG-CF (0.6mm nozzle).
Check Price
#9
Bambu Lab P1S Combo, P1S 3D Printer and AMS, Support Up to 16 Colors/Multi Materials, 500mm/s Fast Printing & High Precision, CoreXY & Auto Bed Leveling, Ready-to-Use FDM 3D Printers Large Print Size
Brand: BAMBULAB
$1,649.00
⭐ 4.4
Read more
- Up to 16 Colors: Bring your designs to life with vibrant multi-color/multi-material printing capabilities, perfect for showcasing your creativity. Note: Connecting Bambu Lab AMS is required.
- 500mm/s and 20000 mm/s Acceleration True High Speed: Don't wait around for your masterpieces. Lightning-fast printing speed lets you focus on creating, not waiting.
- Enclosed Design: Fully enclosed body improves print performance for advanced filaments.
- Automatic Bed Leveling: Say hello to high-quality, successful prints. Auto bed leveling makes 3D printing such an easy thing.
- Set Up in 15 Minutes: Spend more time printing and less time setting up. User-friendly design ensures a hassle-free assembly experience for all skill levels.
- Supported Filament: Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA; Capable : PA, PC; Not Recommended: Carbon/Glass Fiber Reinforced Polymer.
Check Price
#10
ELEGOO FDM 3D Printer Neptune 4 with Up to 500mm/s High-Speed, 121-Point Auto Bed Leveling, 300℃ Dual-Gear Direct Extruder, Printing Size of 225x225x265mm³ /8.85x8.85x10.43 Inches
Brand: ELEGOO
$422.99
⭐ 4.4
Read more
- Pre-installed Klipper Firmware: With a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core high-performance processor, ELEGOO Neptune 4 can achieve printing speed of up to 500mm/s (recommended 250mm/s), allowing you to produce your models faster than ever before, support input shaping and pressure advance function to improve the print quality of models. 8G RAM provides enough storage space for fast printing.
- Dual-Gear Direct Extruder: The new self-developed dual-gear direct drive extruder with a 5.2:1 reduction ratio ensures powerful extrusion and smoother filament feeding. Paired with copper-titanium all-metal throat pipe and unique air duct design to effectively improve the heat dissipation of the throat pipe and reduce nozzle blockage risk.
- 300C High-temp Nozzle: With a 300C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon.
- Auto Bed Leveling: The 121 (11x11) points auto bed leveling ensures quick and accurate leveling of the build platform. For ideal first-layer printing, you can also use the hand-twist knobs under the build platform for auxiliary leveling. In addition, the PEI magnetic platform allows for the easy printed models removal with just a slight bend.
- Efficient and Instant Cooling: The 2 thickened double-sided 4015 model cooling fans with strong wind for more comprehensive and efficient heat dissipation, along with the 4x4020 ball bearing blower fans behind the print head to quickly cool down the newly deposited model, ensuring good print quality even at very fast printing speed.
- Removable Capacitive Touchscreen: The 4.3-inch removable capacitive touchscreen can be operated by hand-held or fixed on the base, and features a model preview function and pause printing function for added convenience. The gantry's LED light strip with 30 beads and a hood, combined with an LED light on the nozzle for observing the model printing in a dark circumstance.
Check Price
