10 Best Benchtop Smoke Absorbers
#1
Fume Extractor, Solder Fume Absorber with 5 of Activated Carbon Sponge, Adjustable 30° Angle and 6800rpm/min Speed, 3rd Floor Depth Filtering, No Residue, for Workshop, Workbench
Brand: LBMED
$296.86
⭐ 4.7
Read more
- High Efficiency Air Filtrationsolder smoke extractor uses 3 advanced filters including HEPA and activated carbon beads to achieve maximum extraction efficiency. addition of a sub-filter helps eliminate 97% of particles larger than 0.3m, keeping air you breathe safe.
- Adjustable TiltTo achieve best welding smoke exhaust angle on workbench. Turn knobs at both ends to loosen, then adjust the tilt of smoker. When desired inclination is reached, tighten knob to secure front of fan, effectively capturing and removing smoke.
- Powerful Suction Capabilitydevice is equipped with a powerful suction fan that can effectively divert welding fumes produced by burning flux and other fumes away from your face. means you can keep air fresh and focus unwaveringly on your welding tasks.
- Quiet Low NoiseMade of safe materials, lightweight and durable.high-efficiency fan action keeps fan relatively quiet even at full air volume, minimizing disruption to the workspace. Quickly, safely and efficiently remove fumes from soldering stations, workstations, etc.
- Wide Applicationvacuum cleaner specially used for grinding, polishing, painting, and welding. for hand model enthusiasts. can used to collect dust during model making process to prevent dust from leaving an impression and keep workbench clean and tidy.
Check Price
#2
Fume Extractor, Industrial Smoke Absorber with 360° Universal Tube and Smoke Hood, 2-Layer Filtration System and 138m³/H Flow Rate, 99.99 Purification Efficiency, Does Not Leak Smoke, for Weld
Brand: LBMED
$412.07
⭐ 4.1
Read more
- 99.99% Purification Rategenerate a maximum airflow of 138 cubic meters/hour, ensuring that even smallest particles can captured and removed from air. suction power is much higher than similar size products, making it perfect companion for long welding sessions.
- 2-Level FiltrationProviding 2-stage filtration technology, pleated pre-filter can remove dust, nail fillers, and larger particles from newspaper clippings. Activated carbon chemisorption filters effectively absorb chemical vapors, providing better filtration tabletop units.
- Universal TubeEasy to adjust so can place cone where you want it and it stays in place without any additional adjustments to capture smoke and particles at source. Easily absorbs all small objects near hood head. Including waste gas, powder, iron filings, etc.
- Aviation-grade Noise Reduction StructureAdopts aviation-grade noise reduction design. Each interface of structure is coated with noise-reducing coating and encapsulated with high-density sound-absorbing sponge. noise level generated is less than 40 decibels.
- Applicationfor DIY welding, engraving, inner core repair, beauty and manicure, printing and welding, etc. It can effectively remove the smoke and harmful gases produced, and the high purification rate allows you to breathe fresh air again, improving utilization.
Check Price
#3
60w Soldering Smoke Absorber ESD Fume Extractor with LED Light Activated Carbon Filter Sponge Solder Smoking Instrument
Brand: HTONVK
$269.56
⭐ 4.2
Read more
- 360adjustable welding smokerwith Activated carbon sponge.
- Strong smoking, HEPA Dense mesh filter , anti-static.
- Ball bearing, speed Fast, low noise.
- Bold power cord long lifeNot easy to age.
- Effectively prevent the absorption of toxic flux and lead fumes.
Check Price
#4
2 Inch Antidious Fume Extractor with Speed Controller & 20 Feet of Ducting 18W Inline Exhaust Fan Smoke Soldering DIY Fan for Soldering Work Laser Engraving Marking
Brand: DAYDAY helper
$128.99
⭐ 4.6
Read more
- Laser Soldering Fume Extractor Parameters: DUCT DIAMETER: 2(50mm) Airflow: 54 m/h Power: 18W Noise: 58 dB Pressure: 570 Pa; Can be connected to 50mm Aluminum foil pipe; The Exhaust Fan main body is detachable and humanized design, which is easy to install and more convenient for later cleaning and maintenance.
- Packing include a 236-inch/6m adjustable aluminum foil tube can adjust direction according to actual needs. Durable plastic fan housing and blades deliver great airflow at extremely low noise levels, and the variable SPEED CONTROLLER makes it easy for you to adjust the fan speed.
- 12V DC Motor: DC motor, low power, fast speed and high wind pressure. Different from the standard AC motors on the market, the power is high, the speed is low, the wind pressure is low, after 6 hours of work, it will be shut down and rested. The 12V weak current safe operation can continue to work for 24 hours. DAYDAY helper allows more people to breathe good air!
- Multifunction Exhaust Blower: Saving performance is very good, This embedded fan to run more quietly and reach low speeds without generating noise or heat. Widely used in homes, offices, warehouses, restaurants, bars, shops, shopping malls, grow tents, greenhouses and other places where a lot of air is needed.
- Wide Applications: This Inline Duct Fan are used all small spaces in kitchen, bathroom, offices, cafes, apartments, and other residential buildings such as lockers, wardrobes, storage rooms, bathrooms. Note: * People who are sensitive to sound are advised not to use the duct fan in the bedroom and study room! *
Check Price
#5
VEVOR Filter Fume Extractor Pure Air Fume Extractor 150W with 3 Stage Filters
Brand: VEVOR
$312.99
⭐ 4.1
Read more
- 99.91% Purification Rate: The 150W DC motor of the fume extractor creates a powerful 165 CFM airflow to exhaust and purify the air. After using, the smoke purification rate is as high as 99.91%, allowing you to breathe fresh air again.
- 3-Stage Filters: The solder fume extractor has 3 stage filters for high-quality filtration. A cotton filter, central HEPA filter, and an activated carbon filter absorb all smoke, dust, and harmful gases at work. The filter boasts of pleated design, with an expansion area of 2.1m2, significantly increasing filtration effectiveness.
- 3 Adjustable Speeds: The speed of our welding fume extractor can be adjusted according to your work needs. Three stages speed from strong to weak can meet different working requirements. Only when you has a comfortable working environment, you can improve work efficiency.
- Low Noise Motor: The powerful 150W DC brushless motor of the FL-250 fume extractor creates a max rotation speed of 4500 RPM. In addition, our engine features low noise. The sound can be lower than 63 db, which quietly gives you a fresh environment.
- Compact & Flexible: Our smoke extractor is 11 x 11 x 16.9 inches, like a A4 paper size, which is suitable for small solder stations and home DIY. Our metal latches very tightly closed the main filter bulk, completely sealed to prevent any leak. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement.
Check Price
#6
Solder Fume Extractor Smoke Absorber with Benchtop Clamp, Desktop Smoke Sucker Remover LED Lamp, Filters Soldering Fume Remover for DIY Welding Work Soldering Work
Brand: HTONVK
$286.00
⭐ 4.7
Read more
- 3-IN-1Absorbing smoke, Lighting, and Filtering are equipped with three major functions on one fume extractor. The pipe mouth is equipped with a ring mounted LED lamp, which can provide absolute illumination when soldering. Also can adjust the brightness of the light, bringing an unparalleled experience to your DIY work or welding work.
- ADJUSTABLE SUCTIONThe suction strength can be adjusted by fan switch. The fume sucker is designed for close range smoke exhaust, the effective absorption distance is less than 6cm / 2.36inchs.
- 2M LONG SMOKING TUBEFume extractors smoking tube is 2m/78inches long to reach all corners of your bench and stays put, exactly where you position it. flexible support assistant can can be bent to just about any position for your projects, make your welding work more freely.
- CARBON FILTERSInstall the 5 pieces of activated carbon cotton filter in the product packaging in the smoke exhaust box, which can effectively play the role of filtration. Generally, the replacement cycle of carbon filter is 4-5 months.
- CAN BE PLACED ANYWHEREThe fume extractor comes with mounting screws so you are able to install it on the underside of your work table. You can even put the fan box out of the window and let the exhaust gas directly exhaust to the outside, which can make the indoor air fresher and make your working environment quieter.
Check Price
#7
Jonard SA-9-115 Benchtop Fume Absorber with 3 Filter 115VAC
Brand: Jonard
$440.71
⭐ 4.7
Read more
- No features listed
Check Price
#8
Benchtop Solder Fume Extractor, Smoke Absorber Remover Fume Extractor Air Fan for Soldering, Carbon Filter Quiet Fan for Soldering Station
Brand: LIALIYA
$77.89
⭐ 5
Read more
- Exhaust fan: The on/off button is located on the back of the fan of the smoker, plugged into the AC power plug to supply power.
- Operational in standing or sitting mode for more direct smoke absorption from your work desk, power consumption: 19W (50 / 60Hz).
- Function: quickly, safely and efficiently eliminate fumes, welding fumes, flux fumes, and odors from soldering stations, workstations, nails, paints, etc.
- Activated carbon filter: absorbs and captures the smoke of chemical substances and gases, and helps prevent it from being emitted in the room.
- Easy to use: Easy to replace the filter, including filter replacement.
Check Price
#9
MUIN Solder Fume Extractor - 3 Stage Filtration Solder Smoke Absorber for Soldering and Wood Burning,Portable Soldering Fume Extractor Fan for Soldering Station (Blue)
Brand: MUIN
$75.90
⭐ 4.2
Read more
- ELIMINATES IRRITATING ODORS: Featuring 3 Stage Filter, the fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.
- HIGHLY VERSATILE: The high versatility of this fume extractor soldering fan enables you to stay relaxed and concentrated throughout Soldering, Wood-Burning (Pyrography), 3D Printing, Stained Glass, and Crafting, Nail Salons, Woodworking, Jewelry Making, and Smoking.
- STRONG SUCTION WITH SLIGHT NOISE: The predominantly optimized soldering fan empowers you to remove fumes even 4-5 Inches away with minor noise. You will experience fresh, focused, and devoted working surroundings with this solder fan.
- UNUSUAL STORAGE SAVER: The highly compatible design of this solder filter heightens its portability, allowing it to take a minimum space to avoid cluttering on your desktop.
- TOP-NOTCH MATERIAL: MUIN is working diligently in making expediting products so far. We ensure quality by using ABS material in the construction of this solder extractor fan. Click ADD TO CART and be ready to get a sturdy solder fumes extractor at your doorstep!
Check Price
#10
Aoyue 486 Benchtop Solder Smoke Absorber
Brand: Aoyue
$141.64
⭐ 4.7
Read more
- Great for electronics, arts and crafts, and stained glass work
- Quiet yet powerful operation
- Activated carbon filter
- ESD-safe
Check Price
