10 Best Flared Tube Fittings

#1 Best Pick

uxcell 1/2" Brass Flare Nut, 2pcs SAE 45 Degree Copper Flare Tube Fitting Brass Pipe Fitting for Air Conditioner Copper Pipe Extension Water Gas Line, Matte

Brand: uxcell

Color: Gold; Material: Brass; Thread specification: 1/2" female flare ( 3/4"-16 UNF thread); Height: 20mm / 0.79 inch; Hex Width: 23.5mm / 0.93 inch; Inner Hole Dia: 12.9mm / 0.51 inch; Fit for copper pipe outer diameter 1/2" (12.7mm); Temperature: -53 Celsius to 100 Celsius; Packing List: 2pcs x Brass Flare Nut
Advantages: Made from brass, our flare tube fittings are rust-resistant, corrosion-resistant, and vibration-resistant, ensuring long-lasting performance. Our flare tube fittings create a secure, leak-free seal even in high-pressure and vibrating applications, saving you time and effort on repairs.
Instruction: Easy installation and reusability. Our flare tube fittings are easy to install and can be reused, making them a versatile and cost-effective solution for all your flare tube fitting needs.
Application: Our brass flare tube fitting can work with aluminum, copper, brass, and welded steel tubing that can be flared, ensuring a secure connection for all your fuel, oil, gas, and air line applications. Manufactured especially for hard-to-hold liquids and gases. These brass flare tube fittings are good solutions for your mini split air conditioner, HVAC system and other plumbing needs.
NOTE: The tape is provided as an additional accessory for your plumbing work, we don't advise using this tape on flare tube fittings.

Check latest price on Amazon

#2 Best Value

YELARXI Brass Flare Tube Fitting Coupling Gas Adapter, 5/8" Male Flare x 1/2 Inch Female SAE Thread Pipe Connector Fit for air Conditioning HVAC Automotive Grills (Gold)

Brand: YELARXI

DURABLE MATERIAL - The coupling gas adapter is made of solid brass material, high hardness, durable, corrosion-resistant and heat-resistant
MULTI APPLICATION - Brass flare tube fitting is used to connect metal pipes, mainly for oil, gas, and liquid transmission systems, such as pipeline, refrigeration equipment, water supply pipelines and vacuum applications. suitable for air conditioning, heaters, BBQ grills, dryers, campers, etc
KEY POINTS - One end is a flare tube fitting, and the other end is an pipe connector to maintain a good seal
PACKAGE SPEC - Color: Gold; Material: Brass; Thread Size: 5/8 inch Male Flare x 1/2 inch Female; Packing List: 1Pcs x Brass Tube Fitting
EASY-TO-USE - Easy to use without flaring tools. It is recommended to use with waterproof tape for added protection

Check latest price on Amazon

#3 Budget Pick

LSTOPGO 3 Pack Brass Flared Plug 5/16 Inch Tube OD Flare Tube Fitting SAE 45 Degree Hex Pipe Plug Seal Plug

Brand: LSTOPGO

Package Including: This package includes 3 pack 5/16 Inch brass SAE 45 degree flare plugs
Solid Connection: SAE 45 degree flare tube fitting can provide a reliable connection with the flare on the pipe clamped between the nut and the body, safe and reliable, tight and stable
Reliable Material: The SAE 45 degree flare tube fitting is made of quality brass,sturdy and reliable,threads are deep and accurate,corrosion resistance,low magnetic permeability and high temperature ductility
Satisfactory Functions: SAE 45 degree flare tube fitting seal plugs can work under harsh conditions,can effectively block and prevent leaks.Designed for high pressure use and have good resistance to mechanical pulling
Widely Used: This brass pipe plug is suitable for terminating/closing pipe end, gas pipelines, hydraulic and refrigeration systems,RV furnaces, water heaters and more. It can be used with brass, copper, aluminum and stainless steel tubes which can be flared

Check latest price on Amazon

#4 Top Choice

uxcell Flared Tube Fitting Union G1/4 x 6mm Tube OD Reusable Hydraulic Straight Hose End Male Fittings 2pcs

Brand: uxcell

UNIVERSAL DESIGN - Flared Tube Fitting Connects to hose 5mm ID and 6mm OD on one end and a 1/4" female G threaded connection on the other.
HIGH QUANLITY MATERIAL- The Reusable Fitting surface is made of nickel-plated nickel, and the strength and hardness are large. and it's not easy to wear, durable and has a long service life.
ADVANTAGE - Copper-plated nickel material is not easy to rust in humid environment, strong in oxidation resistance and corrosion resistant
EXCELLENT DESIGN - Easy to install and disassemble.Lock-type quick-twist joints, the ends can be arbitrarily removed
APPLICATION - Flared Tube Fitting are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries Recommended for low pressure air hose applications

Check latest price on Amazon

#5 Popular Choice

Joywayus Brass Flare Tube Fitting Coupling Gas Adapter 3/8" Flare Male x 1/4" NPT Female Pipe Connector (Pack of 2)

Brand: Joywayus

【Size】2PCS 3/8"Flare Male x 1/4"NPT Female
【Flare Thread】Flared tube connection on one end and NPT connection on the other. Easy to disassemble no flaring tool required. Teflon tape and thread sealant are recommended for threaded joints.
【Material】Heavy Duty Brass, firm and durable. Brass for corrosion resistance, high temperature ductility and low magnetic permeability.
【Temperature Range】From -53℃ to 121℃ (-65℉ to 250℉).
【USE】The flare threaded connects to a flared tube or fitting, and is suitable for use with fuel and gas systems. Use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.

Check latest price on Amazon

#6 Top Pick

Mtsooning Brass Tube Adapter, 3/8inch Male Flare×1/2inch Female NPT Pipe Coupling Fittings

Brand: Mtsooning

【100% SOLID BRASS】: Brass adapter with flared tube connection is made of high-quality solid brass, resistant to high and low temperatures, corrosion, good ductility at high temperatures, and low magnetic permeability. The working temperature of 1/2 Female NPT tube fitting is from -65℉ to 250℉(form -53°C to 121°C) , which can guarantee the stable operation of your equipment.
【PIPE FITTING SIZE】: The size of 3/8inch male flare is 5/8inch nominal thread size, and the size of 1/2inch female NPT is 0.84inch nominal thread size. Please check the size you need carefully before placing an order.
【WIDE APPLICATIONS】: 3/8inch male flare coupling can be used in pneumatic and hydraulic systems, plumbing, refrigeration, vacuum applications. Pipe fittings are components used to connect, branch, terminate and change the direction of pipes in various situations.
【NOTE】: 3/8inch Flare×1/2inch Female NPT pipe coupling contains LEAD and should not be used in potable water systems! Brass coupling fitting contains LEAD and should not be used in potable water systems!
【PACKAGE INCLUDED】: You will receive 1PC 3/8inch Flare×1/2inch Female NPT pipe fittings. If the pipe fitthings are damaged or the quantity is missing, please contact us in time, and we will give you a replacement or refund. Hope you are satisfied with our service!

Check latest price on Amazon

#7 Top Pick

sourcing map 2Pcs 1/2" Tube OD Brass Flare Cap, 3/4"-16 UNF Female Thread 45 Degree Flared SAE Hex Pipe Fitting, Seal Tube Fittings with Tape for Air Conditioner Pipe Extension Water Gas Line

Brand: sourcing map

[Size & Package]: You will receive 2 pieces of female-threaded brass caps and 1 roll of sealing tape, with a total size of 18.5 x 23.5 mm / 0.73 x 0.93 Inch (L x W), suitable for pipes with an outer diameter of SAE 1/2 Inch (12.7mm) / 3/4"-16 UNF
[Material ]: The flare cap fitting is made of brass, which has good anti-rust, anti-corrosion, and anti-vibration properties. The unique structure design enables it to withstand high pressure and ensure long-term durability, suitable for indoor and outdoor humid environments
[Good Sealing Effect]: The brass seal caps can fit tightly with the cone of the fitting even under high pressure and vibration, forming a solid and leak-free seal to effectively prevent the leakage of liquid or gas. You can quickly and easily replace damaged or worn parts to restore the good performance of the HVAC system
[Easy to Use]: You can easily install the flared tube fitting. Just choose the right size connector, align it with the pipe port, and tighten it properly with a wrench to ensure that it is firmly connected to the pipe. Pay attention to controlling the force during operation to avoid damage caused by excessive force
[Widely Applicable]: The brass flare cap is designed for high-pressure environments and can be used to terminate/close pipe ends, gas pipelines, hydraulic systems, and refrigeration units. It is widely used in the connection of fuel, oil, air, propane, and liquefied petroleum gas pipelines to ensure safe and reliable connection effects

Check latest price on Amazon

#8 Top Pick

sourcing map 2Pcs 1/4" Tube OD Brass Flare Cap, 7/16"-20 UNF Female Thread 45 Degree Flared SAE Hex Pipe Fitting, Seal Tube Fittings with Tape for Air Conditioner Pipe Extension Water Gas Line

Brand: sourcing map

[Size & Package]: You will receive 2 pieces of female-threaded brass caps and 1 roll of sealing tape, with a total size of 14.5 x 16 mm / 0.57 x 0.63 Inch (L x W), suitable for pipes with an outer diameter of SAE 1/4 Inch (6.35mm) / 7/16"-20 UNF
[Material ]: The flare cap fitting is made of brass, which has good anti-rust, anti-corrosion, and anti-vibration properties. The unique structure design enables it to withstand high pressure and ensure long-term durability, suitable for indoor and outdoor humid environments
[Good Sealing Effect]: The brass seal caps can fit tightly with the cone of the fitting even under high pressure and vibration, forming a solid and leak-free seal to effectively prevent the leakage of liquid or gas. You can quickly and easily replace damaged or worn parts to restore the good performance of the HVAC system
[Easy to Use]: You can easily install the flared tube fitting. Just choose the right size connector, align it with the pipe port, and tighten it properly with a wrench to ensure that it is firmly connected to the pipe. Pay attention to controlling the force during operation to avoid damage caused by excessive force
[Widely Applicable]: The brass flare cap is designed for high-pressure environments and can be used to terminate/close pipe ends, gas pipelines, hydraulic systems, and refrigeration units. It is widely used in the connection of fuel, oil, air, propane, and liquefied petroleum gas pipelines to ensure safe and reliable connection effects

Check latest price on Amazon

#9 Top Pick

uxcell 5/16" Brass Flare Nut, 5pcs SAE 45 Degree Copper Flared Tube Fitting Brass Pipe Fitting for Air Conditioner Water Gas Line, Glossy

Brand: uxcell

Color: Gold; Material: Brass; Thread specification: 5/16" female flare ( 9/16"-18 UNF thread); Height: 16mm / 0.63 inch; Hex Width: 19mm / 0.75 inch; Inner Hole Dia: 8.1mm / 0.32 inch; Fit for copper pipe outer diameter 5/16" (8mm); Temperature: -53 Celsius to 100 Celsius; Packing List: 5pcs x Brass Flare Nut
Advantages: Made from brass, our flare tube fittings are rust-resistant, corrosion-resistant, and vibration-resistant, ensuring long-lasting performance. Our flare tube fittings create a secure, leak-free seal even in high-pressure and vibrating applications, saving you time and effort on repairs.
Instruction: Easy installation and reusability. Our flare tube fittings are easy to install and can be reused, making them a versatile and cost-effective solution for all your flare tube fitting needs.
Application: Our brass flare tube fitting can work with aluminum, copper, brass, and welded steel tubing that can be flared, ensuring a secure connection for all your fuel, oil, gas, and air line applications. Manufactured especially for hard-to-hold liquids and gases. These brass flare tube fittings are good solutions for your mini split air conditioner, HVAC system and other plumbing needs.
NOTE: The tape is provided as an additional accessory for your plumbing work, we don't advise using this tape on flare tube fittings.

Check latest price on Amazon

#10 Top Pick

2PCS Male Flared Straight Tube Hydraulic Adapter Fitting,3/8" Male JIC 37° Flare (9/16"-18UNF) × 3/8" Male JIC 37° Flare (9/16"-18UNF),SAE Carbon Steel Straight Pipe Joints Tube Connector

Brand: LSHPG

【Package Includes】:You will receive 2 pieces Male Flared Straight Tube Hydraulic Adapter Fitting
【Size】:3/8" Male JIC 37° Flare (9/16"-18UNF) × 3/8" Male JIC 37° Flare (9/16"-18UNF) Hydraulic Hose Adapter Fitting.
【Quality Materials】:Made from high-strength, corrosion-resistant carbon steel.
【Application】:Ideal for use in fluid power systems and various hydraulic applications.
【Working Temperature】:-65°F (-54°C) to 250°F (120°C).

Check latest price on Amazon

10 Best Flared Tube Fittings

uxcell 1/2" Brass Flare Nut, 2pcs SAE 45 Degree Copper Flare Tube Fitting Brass Pipe Fitting for Air Conditioner Copper Pipe Extension Water Gas Line, Matte

YELARXI Brass Flare Tube Fitting Coupling Gas Adapter, 5/8" Male Flare x 1/2 Inch Female SAE Thread Pipe Connector Fit for air Conditioning HVAC Automotive Grills (Gold)

LSTOPGO 3 Pack Brass Flared Plug 5/16 Inch Tube OD Flare Tube Fitting SAE 45 Degree Hex Pipe Plug Seal Plug

uxcell Flared Tube Fitting Union G1/4 x 6mm Tube OD Reusable Hydraulic Straight Hose End Male Fittings 2pcs

Joywayus Brass Flare Tube Fitting Coupling Gas Adapter 3/8" Flare Male x 1/4" NPT Female Pipe Connector (Pack of 2)

Mtsooning Brass Tube Adapter, 3/8inch Male Flare×1/2inch Female NPT Pipe Coupling Fittings

sourcing map 2Pcs 1/2" Tube OD Brass Flare Cap, 3/4"-16 UNF Female Thread 45 Degree Flared SAE Hex Pipe Fitting, Seal Tube Fittings with Tape for Air Conditioner Pipe Extension Water Gas Line

sourcing map 2Pcs 1/4" Tube OD Brass Flare Cap, 7/16"-20 UNF Female Thread 45 Degree Flared SAE Hex Pipe Fitting, Seal Tube Fittings with Tape for Air Conditioner Pipe Extension Water Gas Line

uxcell 5/16" Brass Flare Nut, 5pcs SAE 45 Degree Copper Flared Tube Fitting Brass Pipe Fitting for Air Conditioner Water Gas Line, Glossy

2PCS Male Flared Straight Tube Hydraulic Adapter Fitting,3/8" Male JIC 37° Flare (9/16"-18UNF) × 3/8" Male JIC 37° Flare (9/16"-18UNF),SAE Carbon Steel Straight Pipe Joints Tube Connector

More products you might like!!